Deprecated List

Global audio_options_GetBitrate: Use the Codec Interface along with the FE2_CODECPARAM_BITRATE parameter. This function will be removed in a future release. See also: Audio Codecs.

Global audio_options_GetFlvAudioFormat: Use the Codec Interface. This function will be removed in a future release. See also: Audio Codecs.

Global audio_options_GetSamplingrate: Use the Filter Interface along with FE2_FILTER_RESAMPLE and the FE2_RESAMPLE_RATE parameter.

Global audio_options_GetStereo: Use the Codec Interface along with the FE2_LAME_CHANNELS parameter. This function will be removed in a future release. See also: Audio Codecs.

Global audio_options_Reset: Use the Codec and Filter interfaces.

Global audio_options_SetBitrate: Use the Codec Interface along with the FE2_CODECPARAM_BITRATE parameter. This function will be removed in a future release. See also: Audio Codecs.

Global audio_options_SetFlvAudioFormat: Use the Codec Interface. This function will be removed in a future release. See also: Audio Codecs.

Global audio_options_SetSamplingrate: Use the Filter Interface along with FE2_FILTER_RESAMPLE and the FE2_RESAMPLE_RATE parameter.

Global audio_options_SetStereo: Use the Codec Interface along with the FE2_LAME_CHANNELS parameter. This function will be removed in a future release. See also: Audio Codecs.

Global audio_options_Validate: Use the Codec and Filter interfaces.

Global editor_options_GetBrightness: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_BRIGHTNESS parameter. This function will be removed in a future release.

Global editor_options_GetContrast: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_CONTRAST parameter. This function will be removed in a future release.

Global editor_options_GetCrop: Use the Filter Interface along with FE2_FILTER_CROP. This function will be removed in a future release.

Global editor_options_GetCropBounds: Use the Filter Interface along with FE2_FILTER_CROP and the FE2_CROP_TOP, FE2_CROP_LEFT, FE2_CROP_BOTTOM and FE2_CROP_RIGHT parameters. This function will be removed in a future release.

Global editor_options_GetCutStartTime

Please use:

With the constants:

for access to the flix engine cut filter.

Global editor_options_GetCutStopTime

Please use:

With the constants:

for access to the flix engine cut filter.

Global editor_options_GetHue: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_HUE parameter. This function will be removed in a future release.

Global editor_options_GetSaturation: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_SATURATION parameter. This function will be removed in a future release.

Global editor_options_GetUseBrightness: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_BRIGHTNESS parameter. This function will be removed in a future release.

Global editor_options_GetUseContrast: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_CONTRAST parameter. This function will be removed in a future release.

Global editor_options_GetUseCut

Please use:

With the constants:

for access to the flix engine cut filter.

Global editor_options_GetUseHue: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_HUE parameter. This function will be removed in a future release.

Global editor_options_GetUseSaturation: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_SATURATION parameter. This function will be removed in a future release.

Global editor_options_Reset: Use the Filter Interface

Global editor_options_SetBrightness: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_BRIGHTNESS parameter. This function will be removed in a future release.

Global editor_options_SetContrast: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_CONTRAST parameter. This function will be removed in a future release.

Global editor_options_SetCrop: Use the Filter Interface along with FE2_FILTER_CROP. This function will be removed in a future release.

Global editor_options_SetCropBounds: Use the Filter Interface along with FE2_FILTER_CROP and the FE2_CROP_TOP, FE2_CROP_LEFT, FE2_CROP_BOTTOM and FE2_CROP_RIGHT parameters. This function will be removed in a future release.

Global editor_options_SetCutStartTime

Please use:

With the constants:

for access to the flix engine cut filter.

Global editor_options_SetCutStopTime

Please use:

With the constants:

for access to the flix engine cut filter.

Global editor_options_SetHue: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_HUE parameter. This function will be removed in a future release.

Global editor_options_SetSaturation: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_SATURATION parameter. This function will be removed in a future release.

Global editor_options_SetUseBrightness: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_BRIGHTNESS parameter. This function will be removed in a future release.

Global editor_options_SetUseContrast: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_CONTRAST parameter. This function will be removed in a future release.

Global editor_options_SetUseCut

Please use:

With the constants:

for access to the flix engine cut filter.

Global editor_options_SetUseHue: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_HUE parameter. This function will be removed in a future release.

Global editor_options_SetUseSaturation: Use the Filter Interface along with FE2_FILTER_BCHS and the FE2_BCHS_SATURATION parameter. This function will be removed in a future release.

Global editor_options_Validate: Use the Filter Interface

Global FE2_AudioSamplingrates: With the addition of new Muxers the allowed sample rates will change. For this reason the desired value should be entered directly in Flix2_FilterSetParam().

Global FE2_CuePointType: Use the Muxer Interface along with FE2_MUXER_FLV and the FE2_FLV_CUEPT_EVENT/FE2_FLV_CUEPT_NAV parameter. This enumeration will be removed in a future release.

Global FE2_ExportedVideoType: Use the Muxer Interface. This enumeration will be removed in a future release. See also: Muxers.

Global FE2_FlvAudioFormat: Use the Codec Interface. This enumeration will be removed in a future release. See also: Audio Codecs.

Global FE2_LAME_CHANNELS: Use the Filter Interface along with FE2_FILTER_RESAMPLE and the FE2_RESAMPLE_RATE parameter.

Global FE2_VideoCodec: Use the Codec Interface. This enumeration will be removed in a future release. See also: Video Codecs.

Global Flix2_GetExportVideoType: Use the Muxer Interface. This function will be removed in a future release. See also: Muxers.

Global Flix2_SetExportVideoType: Use the Muxer Interface. This function will be removed in a future release. See also: Muxers.

Class flixengine_com::ISwfOptions: Use the flixengine_com::IFlixPlgn interface along with the SWF muxer. This interface will be removed in a future release.

Global flixengine_com::ISwfOptions::addVariable (const BSTR name, const BSTR value): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ADD_VARIABLE parameter.

Global flixengine_com::ISwfOptions::deleteVariable (const on2s32 index): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_DELETE_VARIABLE parameter.

Global flixengine_com::ISwfOptions::getAdaptivePreloaderBufferFactor ([out, retval] double *pPreloaderBufferFactor): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ADAPTIVE_PRELOAD_BUFFER_FACTOR parameter.

Global flixengine_com::ISwfOptions::getEmbeddedUrlType ([out, retval] FE2_EmbeddedUrlType *embeddedUrlType): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL_TYPE parameter.

Global flixengine_com::ISwfOptions::getEnablePreloader ([out, retval] on2bool *pEnablePreloader): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_PRELOAD_TYPE parameter.

Global flixengine_com::ISwfOptions::getInsertBlankFrameOnStart ([out, retval] on2bool *pInsertBlankFrameOnStart): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_START_BLANK_FRAME parameter.

Global flixengine_com::ISwfOptions::getLoopCount ([out, retval] on2s32 *pLoopCount): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_LOOP_COUNT parameter.

Global flixengine_com::ISwfOptions::getMovieOnEndOptions ([out, retval] FE2_SwfOnEndOptions *pOnEndOptions): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_OPTION parameter.

Global flixengine_com::ISwfOptions::getMovieOnStartOptions ([out, retval] FE2_SwfOnStartOptions *pOnStartOptions): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ON_START_OPTION parameter.

Global flixengine_com::ISwfOptions::getPercentToPreload ([out, retval] on2s32 *pPercentToPreload): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_FIXED_PRELOAD_PCT parameter.

Global flixengine_com::ISwfOptions::getPreloaderType ([out, retval] FE2_SwfPreloaderOptions *pPreloaderType): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_PRELOAD_TYPE parameter.

Global flixengine_com::ISwfOptions::getSwfFramerateAsDouble ([out, retval] double *pSwfFramerate): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_FRAMERATE parameter.

Global flixengine_com::ISwfOptions::getVariableCount ([out, retval] on2s32 *pVariableCount): Use the SWF muxer.

Global flixengine_com::ISwfOptions::getWaitTimeToStart ([out, retval] on2s32 *pWaitTimeToStart): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_START_WAIT_SEC parameter.

Global flixengine_com::ISwfOptions::reset (): Use the flixengine_com::IFlixPlgn interface along with the SWF muxer. This interface will be removed in a future release.

Global flixengine_com::ISwfOptions::sc: Use the flixengine_com::IFlixPlgn interface.

Global flixengine_com::ISwfOptions::setAdaptivePreloaderBufferFactor (const double preloaderBufferFactor): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ADAPTIVE_PRELOAD_BUFFER_FACTOR parameter.

Global flixengine_com::ISwfOptions::setEmbeddedUrl (const BSTR embeddedUrl): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL parameter.

Global flixengine_com::ISwfOptions::setEmbeddedUrlTarget (const BSTR embeddedUrlTarget): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL parameter.

Global flixengine_com::ISwfOptions::setEmbeddedUrlType (const FE2_EmbeddedUrlType embeddedUrlType): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL_TYPE parameter.

Global flixengine_com::ISwfOptions::setEnablePreloader (const on2bool enablePreloader): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_PRELOAD_TYPE parameter.

Global flixengine_com::ISwfOptions::setInsertBlankFrameOnStart (const on2bool insertBlankFrameOnStart): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_START_BLANK_FRAME parameter.

Global flixengine_com::ISwfOptions::setLoadMovieOnEndUrl (const BSTR loadMovieOnEndUrl): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_URL parameter.

Global flixengine_com::ISwfOptions::setLoopCount (const on2s32 loopCount): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_LOOP_COUNT parameter.

Global flixengine_com::ISwfOptions::setMovieOnEndOptions (const FE2_SwfOnEndOptions onEndOptions): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_OPTION parameter.

Global flixengine_com::ISwfOptions::setMovieOnStartOptions (const FE2_SwfOnStartOptions onStartOptions): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ON_START_OPTION parameter.

Global flixengine_com::ISwfOptions::setPercentToPreload (const on2s32 percentToPreload): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_FIXED_PRELOAD_PCT parameter.

Global flixengine_com::ISwfOptions::setPreloaderType (const FE2_SwfPreloaderOptions preloaderType): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_PRELOAD_TYPE parameter.

Global flixengine_com::ISwfOptions::setSwfFramerateAsDouble (const double swfFramerate): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_FRAMERATE parameter.

Global flixengine_com::ISwfOptions::setWaitTimeToStart (const on2s32 waitTimeToStart): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_START_WAIT_SEC parameter.

Global flixengine_com::ISwfOptions::updateVariable (const on2s32 index, const BSTR name, const BSTR value): Use the flixengine_com::IFlixPlgn interface along with FE2_MUXER_SWF and the FE2_SWF_ADD_VARIABLE parameter.

Global flixengine_com::IVideoOptions::addFLVCuePoint (const BSTR pName, const double time, const FE2_CuePointType type): See video_options_AddFLVCuePoint() for details.

Global flixengine_com::IVideoOptions::addFLVCuePointParameter (const BSTR pCuePointName, const BSTR pName, const BSTR pValue): See video_options_AddFLVCuePointParameter() for details.

Global flixengine_com::IVideoOptions::getDecimateValue ([out, retval] on2u32 *pValue): See video_options_GetDecimateValue() for details.

Global flixengine_com::IVideoOptions::getSwfHeight ([out, retval] on2s32 *lpSwfHeight): See video_options_GetSwfHeight() for details.

Global flixengine_com::IVideoOptions::getSwfWidth ([out, retval] on2s32 *lpSwfWidth): See video_options_GetSwfWidth() for details.

Global flixengine_com::IVideoOptions::getUseCustomSwfDimensions ([out, retval] on2bool *bpUseCustomSwfDimensions): See video_options_GetUseCustomSwfDimensions() for details.

Global flixengine_com::IVideoOptions::getUseSourceFramerate ([out, retval] on2bool *bpUseSourceFramerate): See video_options_GetUseSourceFramerate() for details.

Global flixengine_com::IVideoOptions::getVideoFramerateAsDouble ([out, retval] double *p_fps): See video_options_GetVideoFramerateAsDouble() for details.

Global flixengine_com::IVideoOptions::setDecimateValue (const on2u32 value): See video_options_SetDecimateValue() for details.

Global flixengine_com::IVideoOptions::setSwfHeight (const on2s32 lSwfHeight): See video_options_SetSwfHeight() for details.

Global flixengine_com::IVideoOptions::setSwfWidth (const on2s32 lSwfWidth): See video_options_SetSwfWidth() for details.

Global flixengine_com::IVideoOptions::setUseCustomSwfDimensions (const on2bool bUseCustomSwfDimensions): See video_options_SetUseCustomSwfDimensions() for details.

Global flixengine_com::IVideoOptions::setUseSourceFramerate (const on2bool bUseSourceFramerate): See video_options_SetUseSourceFramerate() for details.

Global flixengine_com::IVideoOptions::setVideoFramerateAsDouble (const double fps): See video_options_SetVideoFramerateAsDouble() for details.

Global overlay_options_GetMaskPixelRGB: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_MASK_R, FE2_OVERLAY_MASK_G and FE2_OVERLAY_MASK_B parameters. This function will be removed in a future release.

Global overlay_options_GetMaskPixelXY: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_MASK_X and FE2_OVERLAY_MASK_Y parameters. This function will be removed in a future release.

Global overlay_options_GetOverlayPath: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_FILE parameter. This function will be removed in a future release.

Global overlay_options_GetOverlayPosition: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_POS, FE2_OVERLAY_POS_X, FE2_OVERLAY_POS_Y parameters. This function will be removed in a future release.

Global overlay_options_GetUseOverlay: Use the Filter Interface along with FE2_FILTER_OVERLAY. This function will be removed in a future release.

Global overlay_options_Reset: Use the Filter Interface along with FE2_FILTER_OVERLAY. This function will be removed in a future release.

Global overlay_options_SetMaskPixelRGB: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_MASK_R, FE2_OVERLAY_MASK_G and FE2_OVERLAY_MASK_B parameters. This function will be removed in a future release.

Global overlay_options_SetMaskPixelXY: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_MASK_X and FE2_OVERLAY_MASK_Y parameters. This function will be removed in a future release.

Global overlay_options_SetOverlayPath: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_FILE parameter. This function will be removed in a future release.

Global overlay_options_SetOverlayPosition: Use the Filter Interface along with FE2_FILTER_OVERLAY and the FE2_OVERLAY_POS, FE2_OVERLAY_POS_X, FE2_OVERLAY_POS_Y parameters. This function will be removed in a future release.

Global overlay_options_SetUseOverlay: Use the Filter Interface along with FE2_FILTER_OVERLAY. This function will be removed in a future release.

Global swf_options_AddVariable: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ADD_VARIABLE parameter. This function will be removed in a future release.

Global swf_options_DeleteVariable: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_DELETE_VARIABLE parameter. This function will be removed in a future release.

Global swf_options_GetAdaptivePreloaderBufferFactor: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ADAPTIVE_PRELOAD_BUFFER_FACTOR parameter. This function will be removed in a future release.

Global swf_options_GetEmbeddedUrl: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL parameter. This function will be removed in a future release.

Global swf_options_GetEmbeddedUrlTarget: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL_TARGET parameter. This function will be removed in a future release.

Global swf_options_GetEmbeddedUrlType: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL_TYPE parameter. This function will be removed in a future release.

Global swf_options_GetLoadMovieOnEndUrl: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_URL parameter. This function will be removed in a future release.

Global swf_options_GetLoopCount: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_LOOP_COUNT parameter. This function will be removed in a future release.

Global swf_options_GetMovieOnEndOptions: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_OPTION parameter. This function will be removed in a future release.

Global swf_options_GetMovieOnStartOptions: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ON_START_OPTION parameter. This function will be removed in a future release.

Global swf_options_GetPercentToPreload: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_FIXED_PRELOAD_PCT parameter. This function will be removed in a future release.

Global swf_options_GetPreloaderType: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_PRELOAD_TYPE parameter. This function will be removed in a future release.

Global swf_options_GetSwfFramerate: This function has been deprecated in favor of swf_options_GetSwfFramerateAsDouble() because this function can only handle integer framerates.

Global swf_options_GetSwfFramerateAsDouble: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_FRAMERATE parameter. This function will be removed in a future release.

Global swf_options_GetVariableCount: Use the Muxer Interface along with FE2_MUXER_SWF. This function will be removed in a future release.

Global swf_options_GetWaitTimeToStart: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_START_WAIT_SEC parameter. This function will be removed in a future release.

Global swf_options_Reset: Use the Muxer Interface along with FE2_MUXER_SWF. This function will be removed in a future release.

Global swf_options_SetAdaptivePreloaderBufferFactor: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ADAPTIVE_PRELOAD_BUFFER_FACTOR parameter. This function will be removed in a future release.

Global swf_options_SetEmbeddedUrl: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL parameter. This function will be removed in a future release.

Global swf_options_SetEmbeddedUrlTarget: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL_TARGET parameter. This function will be removed in a future release.

Global swf_options_SetEmbeddedUrlType: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_EMBEDDED_URL_TYPE parameter. This function will be removed in a future release.

Global swf_options_SetInsertBlankFrameOnStart: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_START_BLANK_FRAME parameter. This function will be removed in a future release.

Global swf_options_SetLoadMovieOnEndUrl: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_URL parameter. This function will be removed in a future release.

Global swf_options_SetLoopCount: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_LOOP_COUNT parameter. This function will be removed in a future release.

Global swf_options_SetMovieOnEndOptions: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ON_END_OPTION parameter. This function will be removed in a future release.

Global swf_options_SetMovieOnStartOptions: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ON_START_OPTION parameter. This function will be removed in a future release.

Global swf_options_SetPercentToPreload: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_FIXED_PRELOAD_PCT parameter. This function will be removed in a future release.

Global swf_options_SetPreloaderType: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_PRELOAD_TYPE parameter. This function will be removed in a future release.

Global swf_options_SetSwfFramerate: This function has been deprecated in favor of swf_options_SetSwfFramerateAsDouble() because this function can only handle integer framerates.

Global swf_options_SetSwfFramerateAsDouble: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_FRAMERATE parameter. This function will be removed in a future release.

Global swf_options_SetWaitTimeToStart: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_START_WAIT_SEC parameter. This function will be removed in a future release.

Global swf_options_UpdateVariable: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_ADD_VARIABLE parameter. This function will be removed in a future release.

Global video_options_AddFLVCuePoint: Use the Muxer Interface along with FE2_MUXER_FLV and the FE2_FLV_CUEPT_EVENT/FE2_FLV_CUEPT_NAV parameter. This function will be removed in a future release.

Global video_options_AddFLVCuePointParameter: Use the Muxer Interface along with FE2_MUXER_FLV and the FE2_FLV_CUEPT_PARAM parameter. This function will be removed in a future release.

Global video_options_GetAlphaPercentage: Use the Codec Interface along with FE2_CODEC_VP6ALPHA and the FE2_VP6A_ALPHA_BITRATE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetCompressMode: Use the Codec Interface along with FE2_CODEC_VP6 or FE2_CODEC_VP6ALPHA and the FE2_VP6_CXMODE or FE2_VP6A_CXMODE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetDecimateValue: Use the Filter Interface along with FE2_FILTER_FRAMERATE and the FE2_FRAMERATE_DECIMATE parameter. This function will be removed in a future release.

Global video_options_GetDeinterlace: Use the Filter Interface along with FE2_FILTER_ADAPTIVE_DEINTERLACE. This function will be removed in a future release.

Global video_options_GetImageHeight

Please use:

With the constants:

for access to the flix engine video scaling filter.

Global video_options_GetImageQuality: The image quality functions have been deprecated in favor of the maximum bitrate functions. Use video_options_GetMaximumBitrate() instead.

Global video_options_GetImageWidth

Please use:

With the constants:

for access to the flix engine video scaling filter.

Global video_options_GetKeyframeInterval: Use the Codec Interface along with the FE2_VCODECPARAM_KFFREQ parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetKeyframeIntervalType: Use the Codec Interface along with the FE2_VCODECPARAM_KFINTTYPE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetMaximumBitrate: Use the Codec Interface along with the FE2_CODECPARAM_BITRATE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetRateControlType: Use the Codec Interface along with the FE2_VCODECPARAM_RC_MODE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetSwfFramerate: Please use swf_options_GetSwfFramerateAsDouble() to allow for non integer framerates.

Global video_options_GetSwfHeight: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_HEIGHT parameter. This function will be removed in a future release.

Global video_options_GetSwfWidth: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_WIDTH parameter. This function will be removed in a future release.

Global video_options_GetUseCustomSwfDimensions: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_WIDTH/FE2_SWF_HEIGHT parameters. This function will be removed in a future release.

Global video_options_GetUseMaximumBitrate: Use the Codec Interface along with the FE2_CODECPARAM_BITRATE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetUseSourceDimensions

The flix engine encodes video using the video source dimensions by default. If FE2_FILTER_SCALE has not been added to the filter chain, video will be encoded using source dimensions.

Global video_options_GetUseSourceFramerate: Use the Filter Interface along with FE2_FILTER_FRAMERATE. Not adding FE2_FILTER_FRAMERATE with Flix2_AddFilter() implies use of the source frame rate. This function will be removed in a future release.

Global video_options_GetVideoCodec: Use the Codec Interface. This function will be removed in a future release. See also: Video Codecs.

Global video_options_GetVideoFramerate

Please use video_options_GetVideoFramerateAsDouble() to allow for non integer framerates.

Global video_options_GetVideoFramerateAsDouble: Use the Filter Interface along with FE2_FILTER_FRAMERATE and the FE2_FRAMERATE_FPS parameter. This function will be removed in a future release.

Global video_options_SetAlphaPercentage: Use the Codec Interface along with FE2_CODEC_VP6ALPHA and the FE2_VP6A_ALPHA_BITRATE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetCompressMode: Use the Codec Interface along with FE2_CODEC_VP6 or FE2_CODEC_VP6ALPHA and the FE2_VP6_CXMODE or FE2_VP6A_CXMODE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetDecimateValue: Use the Filter Interface along with FE2_FILTER_FRAMERATE and the FE2_FRAMERATE_DECIMATE parameter. This function will be removed in a future release.

Global video_options_SetDeinterlace: Use the Filter Interface along with FE2_FILTER_ADAPTIVE_DEINTERLACE. This function will be removed in a future release.

Global video_options_SetImageHeight

Please use:

With the constants:

for access to the flix engine video scaling filter.

Global video_options_SetImageQuality: The image quality functions have been deprecated in favor of the maximum bitrate functions. Use video_options_GetMaximumBitrate() instead.

Global video_options_SetImageWidth

Please use:

With the constants:

for access to the flix engine video scaling filter.

Global video_options_SetKeyframeInterval: Use the Codec Interface along with the FE2_VCODECPARAM_KFFREQ parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetKeyframeIntervalType: Use the Codec Interface along with the FE2_VCODECPARAM_KFINTTYPE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetMaximumBitrate: Use the Codec Interface along with the FE2_CODECPARAM_BITRATE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetRateControlType: Use the Codec Interface along with the FE2_VCODECPARAM_RC_MODE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetSwfFramerate: Please use swf_options_SetSwfFramerateAsDouble() to allow for non integer framerates.

Global video_options_SetSwfHeight: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_HEIGHT parameter. This function will be removed in a future release.

Global video_options_SetSwfWidth: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_WIDTH parameter. This function will be removed in a future release.

Global video_options_SetUseCustomSwfDimensions: Use the Muxer Interface along with FE2_MUXER_SWF and the FE2_SWF_WIDTH/FE2_SWF_HEIGHT parameters. This function will be removed in a future release.

Global video_options_SetUseMaximumBitrate: Use the Codec Interface along with the FE2_CODECPARAM_BITRATE parameter. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetUseSourceDimensions: The flix engine encodes video using the video source dimensions by default. If FE2_FILTER_SCALE has not been added to the filter chain, video will be encoded using source dimensions.

Global video_options_SetUseSourceFramerate: Use the Filter Interface along with FE2_FILTER_FRAMERATE. Not adding FE2_FILTER_FRAMERATE with Flix2_AddFilter() implies use of the source frame rate. This function will be removed in a future release.

Global video_options_SetVideoCodec: Use the Codec Interface. This function will be removed in a future release. See also: Video Codecs.

Global video_options_SetVideoFramerate

Please use video_options_SetVideoFramerateAsDouble() to allow for non integer framerates.

Global video_options_SetVideoFramerateAsDouble: Use the Filter Interface along with FE2_FILTER_FRAMERATE and the FE2_FRAMERATE_FPS parameter. This function will be removed in a future release.